SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor designed for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The sensor extends the company's SGI Series portfolio and is aimed at lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where reliable micrometre-level measurement is required.
The design pairs an expanded laser spot with optical triangulation. Conventional point-spot sensors concentrate reflected laser energy onto a small area, so microscopic surface features such as scratches, grain boundaries, brushed textures and matte finishes can introduce signal variations that are interpreted as dimensional change. SinceVision says such artefacts can generate false defect warnings and force additional inspection. By collecting reflected light across a broader patch of surface, the SGI-N030W averages localised microscopic peaks and valleys before signal conversion, reducing the influence of surface roughness and optical scattering. The company cites drawn metals, sandblasted surfaces and coated battery foils as target materials.
Measurement performance and interfaces
SinceVision specifies a reference distance of 30 mm and a measurement range of ±5 mm. Repeatability is quoted at 0.05 µm when measuring a diffuse white target under static conditions, with linearity of ±0.02% of full scale across the range. A sampling frequency of 50 kHz, equivalent to a 20 µs update interval, is intended to support high-speed measurement and monitoring of dynamic processes.
Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs delivering either 4–20 mA current or 0–10 V voltage signals. The system also provides master-slave synchronisation, allowing two sensor heads to operate in opposition and measure simultaneously from either side of a component or a moving material.
In-line thickness measurement for battery production
One of the principal applications identified by the company is in-line thickness measurement of lithium-ion battery electrodes, where coating thickness and uniformity influence energy density, internal resistance and long-term cell stability. Conventional offline inspection with contact micrometers or drop indicators can introduce operator variability and may deform wet or uncured electrode material; periodic spot checks also cannot provide continuous coverage across an entire production reel.
In the proposed arrangement, two synchronised sensors sit above and below a moving electrode web on a calibrated, low-thermal-expansion marble gantry. Each head measures its clearance to the material, and a system controller combines those readings with the fixed mounting datum to calculate absolute electrode thickness in real time. According to SinceVision, production trials demonstrated stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate provides longitudinal resolution intended to catch localised coating agglomerations, edge thinning and exposed substrate before the electrode reaches cell winding.
Semiconductor and precision assembly applications
The sensor is also intended for semiconductor manufacturing, where non-contact operation matters when handling sensitive wafer surfaces. Listed uses include wafer position verification, edge detection, height measurement, and checks on wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems.
In precision assembly, the device can monitor the movement of voice coil motors, linear actuators and micro-steppers. Its sampling rate supports capture of transient displacement, mechanical oscillation, settling behaviour and end-stop overshoot across the full measurement range, with position data passed to machine control systems over the Ethernet interface for real-time monitoring and process control.
Addressing surface-related errors
Jack Li, Global Sales and Marketing Director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He explains that conventional point-beam laser sensors can read microscopic scratches and rough coatings as genuine thickness variation, slowing production lines and creating a need for manual inspection. According to the company, the expanded optical spot is intended to average out those surface-related variations, while synchronisation between opposing heads supports high-speed thickness verification.
