Instruments & Meters

Instron Outlines Role of High Strain Rate Testing in Simulation Accuracy

The testing-machine manufacturer's application specialist explains how rate-dependent material data, cited in a 2025 CFRP crash study, can inform simulation, material selection and product development.

Adaeze NwosuOctober 25, 20265 min read11 views

A stylised laboratory scene showing a composite specimen mounted in a high strain rate test rig beside a translucent wireframe model of a crash structure, suggesting material testing feeding simulation.

High strain rate testing can supply the material data that makes crash and impact simulations more representative, according to Andrea Incardona, application engineer and product specialist at testing machine manufacturer Instron. In an article for the company, Incardona argues that the worth of a simulation depends on how faithfully the material model reproduces the conditions a component will actually meet.

Many materials exhibit strain-rate-dependent behaviour: their mechanical response changes as loading speed rises. A material characterised under quasi-static conditions may therefore respond differently during a rapid impact or crash event. Instron points to a 2025 study published in the SAE International Journal of Materials and Manufacturing, "Influence of Strain Rate Effect on Mechanical and Crashworthiness Properties of CFRP Composite Structures," which found that incorporating strain-rate-dependent material properties into crash simulations reduced discrepancies between simulated and experimental results. The discrepancy in peak acceleration fell by 6.5 per cent, while mean acceleration and displacement discrepancies fell by 5.9 and 6.3 per cent respectively.

Characterisation across loading rates

Depending on the material, specimen geometry and test method, Instron says materials can be characterised from quasi-static conditions up to strain rates approaching 1,000/s. Such tests can last only 3 to 10 milliseconds, so data acquisition must resolve very rapid changes in force and deformation. The company argues that comparing the same material at different loading rates shows why rate-dependent data matters: if strength, stiffness, deformation mechanisms or failure behaviour shift as strain rate increases, conventional data alone may leave a model unable to represent a rapid event.

Material selection and weight trade-offs

Conventional properties such as strength and stiffness do not necessarily reveal how a material will respond when loading becomes rapid, and two materials that appear comparable under conventional testing may behave differently at high strain rates. Characterising dynamic behaviour lets engineers consider how each candidate deforms, absorbs energy and ultimately fails. Incardona notes that this matters particularly where performance must be balanced against weight, as in automotive crash structures or aerospace components, where dynamic data can inform both material choice and component design.

Feeding data into development

Instron frames high strain rate testing as part of a development loop in which material behaviour is measured, incorporated into simulation, used to compare design options and then validated through physical testing, rather than as a final check on an existing design. Used earlier, dynamic data can help engineers judge whether a material is suitable, refine a component and understand how changes may affect performance.

Accurate capture remains central. Instron says its high strain rate testing systems support data acquisition at up to 200 kHz, while digital image correlation (DIC) can provide additional information about strain development across the specimen; analysis tools then support data processing and theoretical modelling.

  • Simulation: in the cited CFRP study, rate-dependent properties reduced the peak acceleration discrepancy by 6.5 per cent.
  • Test window: events lasting 3 to 10 milliseconds require fast acquisition, with strain rates approaching 1,000/s.
  • Applications: automotive crash structures and aerospace components, where weight, strength and energy absorption are balanced.

Incardona concludes that material data is only as useful as its relevance to the conditions a component will face, and that high strain rate testing gives engineers a more complete picture of performance from simulation through to product development.